TJ Tree Service presents knowledge and trustworthiness for Nantucket tree work from trimming to tree removal in Nantucket, MA, plus specialized operations. With our workforce, your delight is the success. TJ Tree Service Employees are Ready to Offer the Premier Tree Care Services in Nantucket!Location: Nantucket,MA. 1 Remove Any Obstructions Start by trimming the stump closer to the ground with a chainsaw. Dig up any rocks around the base of the stump.
Hard debris can damage the blades of the stump grinder. Keep the equipment in good working order. Dull blades and missing teeth can be an obstacle to removing the stump. Follow these steps to remove a stump manually: Use a chainsaw or limbing saw to remove any lower branches from the trunk. Remove the top portion of the trunk, but leave enough to use as leverage. Use a shovel, pick mattock and digging bar as. King’s Material Corporation provides stump removal and disposal services at your site or ours.
We are fully equipped to haul out your stumps with our fleet of yard live floor trailers in a timely and cost-effective manner. King’s also has the capability of shearing and processing on site in certain applications. Because recycling is so. Step 1 Drill Holes in the Stump Cut off as much of the top of the stump as possible with your chainsaw. Use a 1-inch spade bit with a spade bit extension to drill evenly spaced holes roughly every 6 to 8 inches around the perimeter of the stump.
Make the holes about 12 inches deep and three to four inches back from the bushleaning.buzzted Reading Time: 3 mins. Aug 31, Wear steel-toed boots for this part of the job. Drill holes a few inches deep into the stump in numerous places, using the biggest, widest drill bit you have.
The wider and deeper the holes, the better. Fill these holes first with water, then with a fertilizer high in nitrogen or stump-remover granules. Soak the ground all around the stump.